For the proper functioning of each generator, it is necessary to regularly change the oil, which ensures proper lubrication of the engine and extends its service life. In this article, we will explain step by step how to safely and correctly change the oil in the 3 best-selling generator sets on our e-shop. HGG 3100x, 5500X-H and 8000x
Instructions for changing oil u Hahn & Sohn HGG 3100X AVR gasoline generators
Oil change interval:
First change: 25 engine hours.
Periodic exchange of 100 engine hours.
*The motor hours counter is located on the panel of the power unit (click 3 times using the button Volts - Hertz - Motor hours)
Exchange procedure:
1. Start the generator to warm the oil and drain it better.
2. Turn off the engine
3. Unscrew the drain plug and drain the oil into a suitable container. If permitted by the model's instructions, tilt the generator slightly to allow the remaining oil to drain.
4. After draining the oil, refit the drain plug
5. Unscrew the oil dipstick. Then pour new oil up to the edge of the dipstick opening
6. Screw in the dipstick
Instructions for changing oil u Hahn & Sohn Gasoline generators HGG 5500 X-H
Oil change interval:
First change: 25 engine hours.
Periodic exchange of 100 engine hours.
*The motor hours counter is located on the panel of the power unit (click 3 times using the button Volts - Hertz - Motor hours)
Exchange procedure:
1. Start the generator to warm the oil and drain it better.
2. Turn off the engine
3. Unscrew the drain plug and drain the oil into a suitable container. If permitted by the model's instructions, tilt the generator slightly to allow the remaining oil to drain.
4. After draining the oil, refit the drain plug
5. Unscrew the oil dipstick. Then pour new oil up to the edge of the dipstick opening
6. Screw in the dipstick
Instructions for changing oil u Hahn & Sohn HGG 8000X gasoline generators
Oil change interval:
First change: 25 engine hours.
Periodic exchange of 100 engine hours.
*The motor hours counter is located on the panel of the power unit (click 3 times using the button Volts - Hertz - Motor hours)
Exchange procedure:
1. Start the generator to warm the oil and drain it better.
2. Turn off the engine
3. Unscrew the drain plug and drain the oil into a suitable container. If permitted by the model's instructions, tilt the generator slightly to allow the remaining oil to drain.
4. After draining the oil, refit the drain plug
5. Unscrew the oil dipstick. Then pour new oil up to the edge of the dipstick opening
6. Screw in the dipstick
